Dell 2707WFP Monitor - Manual (Page 38)

Back
Language
Menu Horizontal
Position
Menu Vertical Position
Menu Timer
Transparency
Menu Lock
Factory Reset
DDC/CI
Exit Menu
Push to go back to the main menu.
Language option to set the OSD display to one of five languages (English, Espanol, Francais, Deutsch, Japanese).
and buttons move OSD left and right.
and buttons move OSD up and down.
OSD Hold Time: Sets the length of time the OSD will remain active after the last time you pressed a button.
Use the and buttons to adjust the slider in 5 second increments, from 5 to 60 seconds.
This function is used to adjust the OSD background from opaque to transparent.
Controls user access to adjustments. When is selected, no user adjustments are allowed. All buttons are locked except the menu
NOTE: When the OSD is locked, pressing the menu button will take the user directly to the OSD settings menu, with
allow user access to all applicable settings.
NOTE: You can also lock or unlock the OSD by pushing and holding the Menu button for 15 seconds.
Reset all OSD settings to the factory preset values.
DDC/CI (Display Data Channel/Command Interface) allows your monitor parameters (brightness, color balance etc) to be adjustable via software on your PC. You can disable
this feature by selecting "Disable".
Enable this feature for best user experience and optimum performance of your monitor.
Push to exit the OSD main menu.
PIP SETTINGS This function brings up a window displaying image from another input source.
PIP/PBP submenu when PIP/PBP OFF(main source is VGA/DVI-D
input) PIP/PBP submenu when PIP/PBP OFF(main source is Video input)
OR