Dell Inspiron 4150 - Manual (Page 5)

Screw Identification
When you are removing and replacing components, photocopy the place mat as a tool to lay out and keep track of the screws. The place mat provides the
number of screws and their sizes.
1 back
2 right
3 front
4 left
NOTICE: When reinstalling a screw, you must use a screw of the correct diameter and length. Make sure that the screw is properly aligned with its
corresponding hole, and avoid over tightening.
Hard Drive Door:
(1 each)
Keyboard to
Bottom Case:
(5 each)
Display Bezel:
(6 each)
Rubber Screw Covers (6
each)
Hinge Bracket to Bottom
Case:
(5 each)
Display Assembly to Top
Cover:
(5 each)
Display-Feed Flex Cable:
(4 each)