Dell Inspiron 4150 - Manual (Page 70)

Replacing the Modem
1. Connect the modem cable to the modem.
2. Align the modem with the screw holes on the system board and press down on the pull-tab to seat the modem in the connector.
3. Install the two M2 x 3-mm screws that secure the modem to the system board.
4. Replace the cover, and tighten the screws.
Back to Contents Page
1 M2 x 3-mm screws (2)
2 modem connector
3 modem cable
4 pull-tab
NOTICE: The connectors are keyed for correct insertion; do not force the connections.
NOTICE: Pressing down on the modem anywhere other than on the pull-tab can break the modem.