Dell Precision 650 User Manual
Page 59
3.
Attach the power and floppy-drive cables to the floppy drive.
4.
If you are installing a new floppy drive rather than replacing a drive, remove the front- panel inserts.
From inside the drive bay, gently press on each side of the insert until it pops out.
5.
Check all cable connections, and fold cables out of the way to provide airflow for the fan and cooling vents.
6.
Close the computer cover.
7.
Connect your computer and devices to electrical outlets, and turn them on.
See the documentation that came with the drive for instructions on installing any software required for drive operation.
8.
Enter system setup
and update the appropriate Diskette Drive A option to reflect the size and capacity of your new floppy drive.
9.
To verify that your computer works correctly, run the
Dell Diagnostics
.
1
power cable
2
floppy-drive cable
NOTICE:
To connect a network cable, first plug the cable into the network wall jack and then plug it into the computer.