Crestron electronic Isys TPS-17W - Manual (Page 24)

ISYS ® TILT TOUCHPANELS
TPS-15G-QM
Isys ® G-Series 15" Tilt Touchpanel w/QuickMedia TM (continued)
Isys ® G-Series Tilt Touchpanels
www.crestron.com | 800.237.2041 | 201.767.3400
© 2007 Specifications subject to change without notice
LAN: (1) 8-wire RJ45 with 2 LED indicators
10BaseT/100BaseTX Ethernet port
Green LED indicates link status
Yellow LED indicates Ethernet activity
24VDC: (1) 2.1mm barrel DC power jack
Do not use
NET: (1) 4-pin 3.5mm detachable terminal block
Cresnet Slave Port, connects to Cresnet control network
USB: (2) USB Type A female
USB 1.1 ports for mouse or touchscreen input
1
GND: (1) 6-32 screw, chassis ground lug
MEMORY EXP.: (1) Type II Compact Flash card slot for
memory expansion
PC CARD A – B: (2) Type II PC Card slots
(reserved for future applications)
1
Power Requirements
Cresnet Power Usage: 75 Watts (3.13 Amps @ 24 Volts DC)
Note: The 24VDC power jack should not be used.
Environmental
Temperature: 41° to 113°F (5° to 45°C)
Humidity: 10% to 90% RH (non-condensing)
Enclosure
Construction: High impact black/silver injection-molded case, tilt
screen with adjustable tension, integral rear cover and cable strain
relief in base
Screen Tilt: Adjustable 45 to 90 degrees
Dimensions
Height: 14.17 in (36.00 cm)
Width: 14.94 in (37.95 cm)
Depth: 13.75 in (34.93 cm)
Weight
15.2 lbs (6.9 kg)
1 See Web site or contact Crestron for a current list of compatible devices.
2 One or more QuickMedia devices are required to facilitate the input and
output of audio, video, and RGB signals. See the “MediaManager” section
of this catalog or visit the Crestron Website for more information about
QuickMedia.
Connectors
QM IN 1: (1) 8-wire RJ45 female, QuickMedia input port
Signal Types: Dynamically configurable under system control as:
(1) RGB input with stereo program audio and (2) mic channels, or
(1) Auto-detecting component (YP
B
P
R
), S-Video (Y/C),
or composite video input with stereo program audio
and (2) mic channels;
RGB Format: RGBHV
RGB Input Resolution, Non-interlaced: 640 x 480 minimum to 1600
x 1200 maximum (60 Hz limit at 1600 x 1200);
Video/HDTV Formats: 480i (NTSC), 576i (PAL), 480p, 576p, 720p
and 1080i;
Horizontal Frequency: 15 to 100 kHz
Vertical Frequency: 50 to 85 Hz
Delay Skew Compensation: 0 - 22 nS
Connects to QM output port of a QM-TX or other QuickMedia device
via CresCAT-QM or CresCAT-IM cable;
Maximum Cable Length: 450 ft (aggregate distance from
QM origination)
QM IN 2: (1) 8-wire RJ45 female, QuickMedia input port
Signal Types: Dynamically configurable under system control as:
(1) RGB input with stereo program audio and (2) mic channels, or
(1) Auto-detecting component (YP
B
P
R
), S-Video (Y/C),
or composite video input with stereo program audio
and (2) mic channels;
RGB Format: RGBHV
RGB Input Resolution, Non-interlaced: 640 x 480 minimum to 1600
x 1200 maximum (60 Hz limit at 1600 x 1200);
Video/HDTV Formats: 480i (NTSC), 576i (PAL), 480p, 576p, 720p
and 1080i;
Horizontal Frequency: 15 to 100 kHz
Vertical Frequency: 50 to 85 Hz
Delay Skew Compensation: none
Connects to QM output port of a QM-TX or other QuickMedia device
via CresCAT-QM or CresCAT-IM cable;
Maximum Cable Length (Video/HDTV): 300 ft (aggregate distance
from QM origination);
Maximum Cable Length (RGB @ 60Hz): 216 ft for 640x480, 140 ft for
800x600, 84 ft for 1024x768, 70 ft for 1280x768, 30 ft for 1600x1200
(using CresCAT-QM or CresCAT-IM cable)
QM OUT 1: (1) 8-wire RJ45 female, QuickMedia output port
containing RGB (same as touchscreen), WAV file audio, and internal
microphone signals;
RGB Format: RGBHV
RGB Output Resolution, Non-interlaced: 1024 x 768 pixels @ 60Hz
Connects to QM input port of any QuickMedia device via
CresCAT-QM or CresCAT-IM cable
HEADPHONES: (1) 3.5 mm TRS mini phone jack
Output Power: 12mW per channel
Minimum Impedance: 32 ohms
RS-232: (1) 6-pin RJ11 female
Computer console, touch output, or mouse/touch input port
1
Bidirectional RS-232 up to 115.2k baud
Hardware and software handshaking support
tilt touchpanels
24