48399_048.pdf, Isys, Tilt touchpanels – Crestron electronic Isys TPS-17W User Manual

Page 48: Interface modules and cables, Tilt touchpanel accessories

Advertising
background image

ISYS

®

TILT TOUCHPANELS

Isys

®

Tilt Touchpanel Accessories

www.crestron.com

|

800.237.2041

|

201.767.3400

© 2007 Specifications subject to change without notice

tilt touchpanels

INTERFACE MODULES AND CABLES

TPMC-CH-IMC

CAT5 Balanced AV Interface Module

The TPMC-CH-IMC is an audio/video interface

module that is included as standard with many Isys

touchpanels that utilize Crestron Home (CH) CAT5

AV connectivity*. The interface module can connect

to the touchpanel using a “triamese” interface cable

(included with tilt model touchpanels) or using

CresCAT-D cable (sold separately). Installed neatly

out of view near the touchpanel, or mounted remotely

in the central equipment cabinet, the TPMC-CH-IMC

provides connections for Cresnet, bidirectional audio,

and (1) video input signal. The balanced CAT5 AV

outputs support cable runs up to 300 feet (observe

distance limitations based upon power consumption

for the touchpanel in use).

Additional interface modules may be purchased and

installed to facilitate connectivity for a single movable

touchpanel at multiple locations. The TPMC-CH-IMC

can also be used as a CAT5 balanced AV interface

for use with other Crestron CAT5 AV products.

SPECIFICATIONS

Connectors

NET: (1) 4-pin 3.5mm detachable terminal block
Cresnet slave port, Connects to Cresnet control network

VIDEO COMP/Y/Y, C/Pb, Pr: (3) BNC female
Provides (1) composite, S-Video, or component video input
Input Impedance: 75 ohms
Input Level: 1 V

P-P

nominal, 1.5 V

P-P

maximum

Maximum DC Offset: 1.5 Volts

AUDIO IN: (1) 5-pin 3.5mm detachable terminal block
Balanced/unbalanced stereo line-level input
Input Impedance: 20k ohm balanced, 10k ohm unbalanced
Maximum Input Level: 4 V

RMS

balanced, 2 V

RMS

unbalanced

AUDIO OUT: (1) 5-pin 3.5mm detachable terminal block
Balanced stereo line-level output (unbuffered pass-thru
from AUDIO TO PANEL)

AUDIO TO PANEL: (1) 8-pin RJ45 female
Bidirectional CAT5 balanced stereo audio port
Output Impedance: 100 ohms balanced
Maximum Output Level: 2 V

RMS

Input Impedance: Infinite (unbuffered pass-thru to
AUDIO OUT)

VIDEO TO PANEL: (1) 8-pin RJ45 female
CAT5 balanced video output port
Output Impedance: 100 ohms balanced

NET TO PANEL: (1) 4-pin 3.5mm detachable terminal block
Pass-thru from NET port

LED Indicators

PWR: (green) Indicates DC power supplied from
Cresnet network

Power Requirements

Cresnet Power Usage: 2 Watts
(0.08 Amps @ 24 Volts DC)

Environmental

Temperature: 41° to 122°F (5° to 50°C)
Humidity: 10% to 90% RH (non-condensing)

Enclosure

Black metal, surface mount box with (2) integral
mounting flanges

Dimensions

Height: 1.29 in (3.28 cm)
Width: 7.30 in (18.54 cm)
Depth: 3.95 in (10.03 cm)

Weight

9.7 oz (0.28 kg)

*The TPMC-CH-IMC is not compatible with QuickMedia

or 10-pin RJ45 based systems.

48

Advertising
This manual is related to the following products: