Crestron electronic Isys TPS-17W - Manual (Page 6)

AUDIO I/O: (1) 8-wire RJ45 female
Bidirectional CAT5 balanced audio port
Signal Types: Receives (1) balanced stereo audio signal, and
transmits (1) balanced stereo audio signal from internal microphone;
Maximum Input Level: 4 V
RMS
Maximum Output Level: 2 V
RMS
Input/Output Impedance: 600 ohms
Connects to any other Crestron CAT5 balanced audio port via
CresCAT cable, or TPMC-CH-IMC interface module (included) via
15 foot “triamese” cable provided;
Maximum Cable Length: 1000 feet
HEADPHONES: (1) 3.5 mm TRS mini phone jack
Output Power: 12mW per channel
Minimum Impedance: 32 ohms
USB: (1) USB Type B female (reserved for future applications)
NET: (1) 4-pin 3.5mm detachable terminal block
Cresnet Slave Port, connects to Cresnet control network, or
TPMC-CH-IMC interface module (included) via 15 foot “triamese”
cable provided
LAN: (1) 8-wire RJ45 with 2 LED indicators
10BaseT/100BaseTX Ethernet port
Green LED indicates link status
Yellow LED indicates Ethernet activity
RS-232: (1) 6-pin RJ11 female
Computer console, touch output or mouse input port
Bidirectional RS-232 up to 115.2k baud
Hardware and software handshaking support
G: (1) 6-32 screw, chassis ground lug
MEMORY EXPANSION: (1) Type II Compact Flash card slot for
memory expansion
Power Requirements
Cresnet Power Usage: 74 Watts (3.1 Amps @ 24 Volts DC)
Environmental
Temperature: 41° to 113°F (5° to 45°C)
Humidity: 10% to 90% RH (non-condensing)
Enclosure
Construction: High impact injection-molded case, tilt screen with
adjustable tension, integral rear cover and cable strain relief in base
Screen Tilt: Adjustable 45 to 90 degrees
Dimensions
Height: 13.78 in (35.01 cm)
Width: 17.63 in (44.79 cm)
Depth: 12.40 in (31.50 cm)
Weight
18.10 lbs (8.21 kg)
ISYS ® TILT TOUCHPANELS
TPS-17B/TPS-17W
Isys ® 17" Widescreen Tilt Touchpanel (continued)
Isys ® Tilt Touchpanels
www.crestron.com | 800.237.2041 | 201.767.3400
© 2007 Specifications subject to change without notice
Connectors
QM IN: (1) 8-wire RJ45 female, QuickMedia input port
Signal Types: Auto-detecting component (YP
B
P
R
),
S-Video (Y/C), or composite video with stereo program audio and
(2) mic channels;
Video Formats: NTSC 480i or PAL 576i
Connects to QM output port of a QM-TX or other QuickMedia device
via CresCAT-QM or CresCAT-IM cable;
Maximum Cable Length: 300 ft (aggregate distance from
QM origination)
VIDEO IN: (1) 8-wire RJ45 female, CAT5 balanced video input port
Signal Types: Auto-detecting component (YP
B
P
R
), S-Video (Y/C),
or composite;
Formats: NTSC 480i or PAL 576i
Input Impedance: 100 ohms balanced
Connects to any Crestron CAT5 balanced video source via CresCAT
cable, or TPMC-CH-IMC interface module (included) via 15 foot
“triamese” cable provided;
Maximum Cable Length: 500 feet for component, 750 feet for
composite/S-Video
tilt touchpanels
6
TPS-17B using QuickMedia