Crestron electronic Isys TPS-17W - Manual (Page 53)

ISYS ® TILT TOUCHPANELS
Isys ® Tilt Touchpanel Accessories
www.crestron.com | 800.237.2041 | 201.767.3400
© 2007 Specifications subject to change without notice
tilt touchpanels
INTERFACE MODULES AND CABLES
TPS-IMW Isys ® Interface Module Wall Plate
The TPS-IMW is a wall plate version of the TPS-IMPC
interface module, providing a flush wall plate connection
for any Isys TPS-3000 or TPS-4000 tilt touchpanel.
The TPS-IMW mounts into a 2-gang electrical box
(2.5" minimum depth) and includes front panel RJ45
connections for the siamese type cable (provided with
the touchpanel or sold separately). Several interface
module wall plates may be installed to facilitate
touchpanel connectivity at multiple locations.
SPECIFICATIONS
Connectors – Front Panel
NET/VIDEO: (1) 10-pin RJ45 female, shielded
Connects to touchpanel via “siamese” cable (included
with touchpanel);
Contains Cresnet data, 24 Volts DC power, ground, and
video signals
AUDIO: (1) 8-pin RJ45 female, shielded
Connects to touchpanel via “siamese” cable (included
with touchpanel);
Contains stereo audio input and mic out signals
Connectors – Rear Panel
NET: (1) 4-pin 5mm detachable terminal block
Connects to Cresnet control network
NTSC/PAL VIDEO: (1) 6-pin 3.5mm detachable terminal
block comprising (1) composite or S-Video input, balanced
or unbalanced;
Input Impedance: 100 ohms (will accept 75 ohm
coaxial video)
AUDIO INPUT: (1) 6-pin 3.5mm detachable terminal block
Balanced/unbalanced stereo line-level input
Input Impedance: 20k ohms balanced, 10k ohms unbalanced
Maximum Input Level: 4 V
RMS
balanced, 2 V
RMS
unbalanced
MIC OUT: (1) 3-pin 3.5mm detachable terminal block
Balanced/unbalanced mono line-level output
Output Impedance: 600 ohms balanced, 300 ohms
unbalanced;
Maximum Output Level: 2 V
RMS
balanced, 1 V
RMS
unbalanced
Power Requirements
Cresnet Power Usage: <1 Watt @ 24 Volts DC – not
including touchpanel
Environmental
Temperature: 41° to 113°F (5° to 45°C)
Humidity: 10% to 90% RH (non-condensing)
Enclosure
2-gang mountable in a standard electrical box; includes black
metal front panel Decora® inserts; requires Decora faceplate
(provided by others)
Dimensions
Height: 4.11 in (10.44 cm)
Width: 3.50 in (8.89 cm)
Depth: 1.51 in (3.82 cm)
Weight
0.48 lb (0.22 kg)
53