Dell Inspiron 4100 - Manual (Page 85)

Re pl a c i n g Par t s 85
10 Insert the battery into the battery bay, or connect the AC adapter to
your computer and an electrical outlet.
11 Turn on the computer.
As the computer boots, it detects the additional memory and automatically
updates the system configuration information.
Adding a Mini PCI Card
If you ordered a Mini PCI card at the same time that you ordered your
computer, Dell has already installed the card for you.
1 Make sure that the work surface is flat and clean to prevent scratching
the computer cover.
2 Save and close any open files, exit any open programs, and shut down
the computer (see page 24).
3 Disconnect the computer from the electrical outlet.
4 Wait 10 to 20 seconds and then disconnect any attached devices.
5 Remove any installed PC Cards, batteries, and devices.
6 To ground yourself, periodically touch an unpainted metal surface on
the back of the computer while you work.
7 Handle components and cards by their edges, and avoid touching pins
and contacts.
8 Turn the computer over, and remove the screw from the Mini PCI card
cover.
9 Place your finger under the cover at the indentation and lift and slide
the cover open.
2H767bk0.book Page 85 Friday, September 28, 2001 1:37 PM