Dell AXIM X3 - Manual (Page 13)

C AU T I O N : S a f e t y I n s t r u c t i o n s 13
Power
• Use only the Dell-provided AC adapter approved for use with this device.
Use of another AC adapter may cause a fire or explosion.
• Before you connect the device to an electrical outlet, check the AC adapter
voltage rating to ensure that the required voltage and frequency match the
available power source.
• To remove the device from all power sources, turn the device off, remove
the battery pack, and disconnect the AC adapter from the electrical outlet.
• To help prevent electric shock, plug the AC adapter and device power
cables into properly grounded power sources. These power cables may be
equipped with 3-prong plugs to provide an earth grounding connection. Do
not use adapter plugs or remove the grounding prong from the power cable
plug. If you use a power extension cable, use the appropriate type, 2-prong
or 3-prong, to mate with the AC adapter power cable.
• Be sure that nothing rests on your AC adapter’s power cable and that the
cable is not located where it can be tripped over or stepped on. If you are
using a multiple-outlet power strip, use caution when plugging the AC
adapter’s power cable in to the power strip. Some power strips may allow
you to insert the plug incorrectly. Incorrect insertion of the power plug
could result in permanent damage to your device, as well as risk of electric
shock and/or fire. Ensure that the ground prong of the power plug is
inserted into the mating ground contact of the power strip.
CAUTION: Safety Instructions (continued)