Dell Inspiron Mini 10 (1012, Late 2009) - Manual (Page 14)

Replacing the AC Adapter Connector
1. Follow the procedures in Before You Begin .
2. Place the AC adapter connector in the computer base.
3. Route the AC adapter connector cable through the routing guide.
4. Replace the I/O board (see Replacing the I/O Board ).
5. Replace the left support bracket (see Replacing the Left Support Bracket ).
6. Follow the instructions from step 4 to step 21 in Replacing the System Board .
7. Replace the battery (see Replacing the Battery ).
Back to Contents Page
CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.