Dell Inspiron Mini 10 (1012, Late 2009) - Manual (Page 16)

9. Note the routing of the Mini-Card antenna cables and remove them from the routing guides on the computer.
10. Disconnect the antenna cables from the Mini-Card.
11. Disconnect the display cable from the connector on the system board.
12. Remove the display cable grounding screw.
13. Remove the screw that secures the display assembly to the computer base.
14. Lift the display assembly off the computer.
Replacing the Display Assembly
NOTE: Ensure that you take adequate care while opening the display.
1 Mini-Card cable routing 2 display cable connector
3 display cable grounding screw
1 screw