Dell Inspiron Mini 10 (1012, Late 2009) - Manual (Page 18)

6. Remove the display bezel.
Replacing the Display Bezel
1. Follow the procedures in Before You Begin .
2. Align the display bezel over the display panel, and gently snap into place.
3. Replace the two screws that secure the display bezel to the display cover.
4. Replace the two rubber pads to cover the screws that secure the display bezel to the display cover.
5. Replace the display assembly (see Replacing the Display Assembly ).
Display Panel
Removing the Display Panel
1. Follow the procedures in Before You Begin .
2. Remove the display assembly (see Removing the Display Assembly ).
3. Remove the display bezel (see Removing the Display Bezel ).
4. Disconnect the camera cable from the connector on the camera module.
5. Remove the four screws that secure the display panel to the display cover.
6. Lift the display panel off the display cover.
CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.
1 camera cable connector