Dell Inspiron Mini 10 (1012, Late 2009) - Manual (Page 19)

Replacing the Display Panel
1. Follow the procedures in Before You Begin .
2. Align the display panel with the display cover
3. Connect the camera cable to the connector on the camera module.
4. Replace the four screws that secure the display panel to the display cover.
5. Replace the display bezel (see Replacing the Display Bezel ).
6. Replace the display assembly (see Replacing the Display Assembly ).
Display Cable
Removing the Display Cable
1. Follow the procedures in Before You Begin .
2. Remove the display assembly (see Removing the Display Assembly ).
3. Remove the display bezel (see Removing the Display Bezel ).
4. Remove the display panel (see Removing the Display Panel ).
5. Turn the display panel over and place it on a clean surface.
6. Pull the pull-tab as shown in the illustration to disconnect the display cable from the connector on the display panel.
1 screws (4) 2 display panel
CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.