Drive-panel inserts – Dell OptiPlex 740 User Manual
Page 113
Advertising
8.
Locate and connect a SATA cable to the SATA1 connector on the system board (see
System Board Components
for mini tower computers).
9.
Replace the computer cover (see
Replacing the Computer Cover
).
Drive-Panel Inserts
If you are installing a new floppy drive, media card reader, or optical drive instead of replacing a drive, remove the drive-panel inserts.
1.
Follow the procedures in
Before You Begin
.
2.
Remove the drive panel by sliding the drive release latch in the direction indicated on the latch to open the panel. Then remove it from the hinges.
1 hard-drive data
cable
2 hard-drivedata cable on system
board
3 hard-drive power
cable
Advertising