Fan problems, Lockups and software problems, The computer does not start up – Dell OptiPlex 740 User Manual

Page 189: The computer stops responding, A program stops responding

Advertising
background image

 

Fan Problems

 

 

 

Lockups and Software Problems

 

 

The computer does not start up

 

The computer stops responding

 

A program stops responding

CAUTION:

Before you begin any of the procedures in this section, follow the safety instructions located in the Product Information Guide.

 

Check the keyboard cable  —

 

l

 

Ensure that the keyboard cable is firmly connected to the computer.

l

 

Shut down the computer, reconnect the keyboard cable as shown in the Quick Reference Guide for your computer, and then restart the

computer.

l

 

Check the cable connector for bent or broken pins and for damaged or frayed cables. Straighten bent pins.

l

 

Remove keyboard extension cables and connect the keyboard directly to the computer.

 

Test the keyboard  —

 

Connect a properly working keyboard to the computer, and try using the keyboard. If the new keyboard works, the

original keyboard is faulty.

 

Run the Dell Diagnostics 

 

See

Dell Diagnostics

.

 

Check for software and hardware conflicts

 

See

Resolving Software and Hardware Incompatibilities

.

CAUTION:

Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.

CAUTION:

To guard against electrical shock, always unplug your computer from the electrical outlet before opening the cover.

NOTICE:

To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of your

computer's electronic components. You can do so by touching an unpainted metal surface on the computer.

 

Check the cable connections  —

 

Ensure that the card fan cable is connected firmly to the card fan connector on the system board (see

System Board Components

for mini tower computers, and

System Board Components

for desktop computers).

CAUTION:

Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.

 

Check the Diagnostic Lights

 

See

Diagnostic Lights

.

 

Ensure that the power cable is firmly connected to the computer and to the electrical outlet

NOTICE:

You might lose data if you are unable to perform an operating system shutdown.

 

Turn the computer off  —

 

If you are unable to get a response by pressing a key on your keyboard or moving your mouse, press and hold

the power button for at least 8 to 10 seconds until the computer turns off. Then restart your computer.

 

Advertising