Dell PowerEdge RAID Controller S300 - Manual (Page 37)

Installing the Drivers 37
5
Installing the Drivers
The Dell PowerEdge RAID Controller (PERC) S100 or PERC S100 adapter
require controller drivers to operate with the supported operating systems.
This chapter contains the procedures for installing the controller drivers for
the following operating systems:
• Microsoft Windows Server 2008
• Microsoft Windows Server 2008 R2
• Microsoft Windows Server 2003 SP2
NOTE: Microsoft Windows Server 2003 R2 is not supported.
Installing the Microsoft Windows Drivers
Downloading the Controller Driver Media
1 Go to support.dell.com/support/downloads.
2 Select Choose by Service TagEnter a Tag.
3 Enter the Service Tag of the system on which you want to install the
PERC S100 adapter/PERC S300 adapter drivers and select Go.
NOTE: Alternatively, you can select Choose a ModelSelect
Model. Navigate to Servers, Storage, Networking
PowerEdge Server. Select the model of your system and select
Confirm.
4 Choose the applicable operating system.
5 Expand the SAS RAID Controller category.
6 Select Download Now for the appropriate controller driver.
NOTE: Load a blank optical medium (CD-ROM or DVD) in your system.
A5_bk0.book Page 37 Thursday, February 10, 2011 8:34 PM