Fan: dell vostro 2510 <br>service manual, Removing the fan, Replacing the fan – Dell Vostro 2510 (Early 2009) User Manual

Page 24

Advertising
background image

Back to Contents Page

Fan

Dell™ Vostro™ 2510

Service Manual

Removing the Fan

Replacing the Fan

Removing the Fan

CAUTION:

Before working inside your computer, read the safety information that shipped with your

computer. For additional safety best practices information, see the Regulatory Compliance Homepage at

www.dell.com/regulatory_compliance.

1. Follow the instructions in

Before Working on Your Computer

.

2. Loosen the two screws that secure the memory cover. (See

Removing a Memory Module

for an illustration of the

memory cover.)

3. Slide the cover out of the compartment and set it aside.

4. Remove the three M2.5 x 5-mm screws that secure the fan to the base of the computer.

5. Disconnect the fan connector from the system board connector, and remove the fan.

1 fan

2 M2.5 x 5-mm screws (3)

3 fan connector

Replacing the Fan

Advertising