Dell Vostro 2510 (Early 2009) - Manual (Page 55)

1 card cable connector 2 card
Replacing the Card
CAUTION: Before working inside your computer, read the safety information that shipped with your
computer. For additional safety best practices information, see the Regulatory Compliance Homepage at
www.dell.com/regulatory_compliance.
This procedure assumes that you have completed the removal procedure Removing the Card .
1. Connect the cable to the card.
2. Replace the card in the card compartment.
3. Replace the M2 x 3-mm screw that connects the card to the USB board.
4. Replace the palm rest (see Replacing the Palm Rest ).
5. Replace the display assembly (see Replacing the Display Assembly ).
6. Replace the keyboard (see Replacing the Keyboard ).
7. Replace the hinge cover (see Replacing the Hinge Cover ).
8. Replace the WLAN card (see Replacing a WLAN Card ).
9. Replace the hard drive cover. See Removing the Hard Drive for an illustration of the hard drive cover.
Back to Contents Page