Replacing the hinge cover – Dell Vostro 2510 (Early 2009) User Manual
Page 35
1 raised part of hinge cover on right side
Replacing the Hinge Cover
CAUTION:
Before working inside your computer, read the safety information that shipped with your
computer. For additional safety best practices information, see the Regulatory Compliance Homepage at
www.dell.com/regulatory_compliance.
NOTICE:
The hinge cover is fragile and can be damaged if extreme force is used. Exercise care when replacing the
hinge cover.
This procedure assumes that you have completed the removal procedure
.
1. Align the two tabs underneath the left edge of the hinge cover with the corresponding notches in the computer.
2. Moving from left to right, press down until the hinge cover snaps into place.
3. Close the display and turn the computer to the back.
4. Press each hinge cover until it snaps into place.