Dell Inspiron 17 (7746, Early 2015) - Manual (Page 38)

38 | Removing the USB Board
Removing the USB Board
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before Working Inside
Your Computer" on page 7. After working inside your computer, follow the
instructions in "After Working Inside Your Computer" on page 9. For more
safety best practices, see the Regulatory Compliance home page at
dell.com/regulatory_compliance.
Prerequisites
1 Remove the battery. See "Removing the Battery" on page 10.
2 Follow the instructions from step 1 to step 3 in "Removing the Optical Drive" on
page 16.
3 Follow the instructions from step 1 to step 3 in "Removing the Hard Drive" on
page 19.
4 Remove the keyboard. See "Removing the Keyboard" on page 22.
5 Remove the base cover. See "Removing the Base Cover" on page 26.
Procedure
1 Remove the screw that secures the USB board to the computer base.
2 Turn the USB board over.
book.book Page 38 Wednesday, November 26, 2014 4:00 PM