Safety instructions, Recommended tools – Dell Inspiron 17 (7746, Early 2015) User Manual

Page 8

Advertising
background image

8

| Before Working Inside Your Computer

Safety Instructions

Use the following safety guidelines to protect your computer from potential damage and
make sure your personal safety.

WARNING: Before working inside your computer, read the safety

information that shipped with your computer. For additional safety best
practices , see the Regulatory Compliance at dell.com/regulatory_compliance.

WARNING: Disconnect all power sources before opening the computer cover or

panels. After you finish working inside the computer, replace all covers, panels,
and screws before connecting to the power source.

CAUTION: You should only perform troubleshooting and repairs as authorized

or directed by the Dell technical assistance team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty.

See the safety instructions that shipped with the product or at

dell.com/regulatory_compliance.

CAUTION: To avoid damaging the computer, make sure that the work surface is

flat and clean.

CAUTION: To disconnect a network cable, first unplug the cable from your

computer and then unplug the cable from the network device.

CAUTION: When you disconnect a cable, pull on its connector or on its pull-tab,

not on the cable itself. Some cables have connectors with locking tabs or
thumb-screws that you must disengage before disconnecting the cable.
When disconnecting cables, keep them evenly aligned to avoid bending any
connector pins. When connecting cables, make sure that the connectors and
ports are correctly oriented and aligned.

CAUTION: Before touching anything inside your computer, ground yourself by

touching an unpainted metal surface, such as the metal at the back of the
computer. While you work, periodically touch an unpainted metal surface to
dissipate static electricity, which could harm internal components.

CAUTION: To avoid damaging the components and cards, handle them by their

edges and avoid touching pins and contacts.

CAUTION: Press and eject any installed card from the media-card reader.

Recommended Tools

The procedures in this document may require the following tools:

Phillips screwdriver

Plastic scribe

book.book Page 8 Wednesday, November 26, 2014 4:00 PM

Advertising