Dell Inspiron 17 (7746, Early 2015) - Manual (Page 7)

Before Working Inside Your Computer | 7
Before Working Inside Your Computer
CAUTION: To avoid damaging the components and cards, handle them by their
edges and avoid touching pins and contacts.
Before You Begin
1 Save and close all open files and exit all open applications.
2 Shut down your computer.
Microsoft Windows 8: Move your mouse pointer to the upper-right or lower-right
corner of the screen to open the charms sidebar, and then click or tap Settings
→
Power → Shut down.
Windows 7: Click or tap Start
→ Shut down.
NOTE: If you are using a different operating system, see the documentation
of your operating system for shut-down instructions.
3 Disconnect your computer and all attached devices from their electrical outlets.
4 Disconnect all cables such as telephone cables, network cables and so on, from
your computer.
5 Disconnect all attached devices and peripherals, such as keyboard, mouse,
monitor, and so on, from your computer.
6 Remove any media card and optical disc from your computer, if applicable.
7 After the computer is unplugged, press and hold the power button for 5 seconds to
ground the system board.
book.book Page 7 Wednesday, November 26, 2014 4:00 PM