Dell Inspiron 17 (7746, Early 2015) - Manual (Page 53)

Replacing the Display Assembly | 53
Replacing the Display Assembly
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before Working Inside
Your Computer" on page 7. After working inside your computer, follow the
instructions in "After Working Inside Your Computer" on page 9. For more
safety best practices, see the Regulatory Compliance home page at
dell.com/regulatory_compliance.
Procedure
1 Place the palm rest at the edge of the table with the speakers facing away from the
edge.
2 Align the screw holes on the palm-rest assembly with the screw holes on the
display hinges and pressing down on the display hinges, close the palm-rest
assembly.
3 Replace the screws that secure the display hinges to the palm-rest assembly.
4 Route the camera and antenna cables through the routing guides on the palm-rest
assembly.
Postrequisites
1 Replace the system board. See "Replacing the System Board" on page 48.
2 Replace the cooling assembly. See "Replacing the Cooling Assembly" on page 37.
3 Replace the wireless minicard assembly. See "Replacing the Wireless Card" on
page 34.
4 Replace the base cover. See "Replacing the Base Cover" on page 29.
5 Replace the keyboard. See "Replacing the Keyboard" on page 25.
6 Follow the instructions from step 3 to step 5 in "Replacing the Hard Drive" on
page 21.
7 Follow the instructions from step 4 to step 6 in "Replacing the Optical Drive" on
page 18.
8 Replace the memory modules. See "Replacing the Memory Module(s)" on page 15.
9 Replace the battery. See "Replacing the Battery" on page 12.
book.book Page 53 Wednesday, November 26, 2014 4:00 PM