Dell V313w All In One Wireless Inkjet Printer User Manual

Page 38

Advertising
background image

Printing photos from a PictBridge-enabled digital camera

PictBridge is a technology available in most digital cameras that lets you print directly from your digital camera
without using a computer.

1

Insert one end of the USB cable into the camera.

Note: Use only the USB cable that came with the camera.

2

Insert the other end of the cable into the PictBridge port on the front of the printer.

Notes:

Make sure that the PictBridge-enabled digital camera is set to the correct USB mode. If the camera USB
selection is incorrect, then the camera is detected as a flash drive, or an error message will be displayed on
the printer control panel. For more information, see the camera documentation.

The printer reads only one memory device at a time.

Warning—Potential Damage: Do not touch the USB cable, any network adapter, any connector, or the printer
in the area shown while actively printing from a PictBridge-enabled digital camera. A loss of data can occur.

3

If the PictBridge connection is successful, then the following message appears on the display: PictBridge
Camera detected. Press OK to change settings.

4

Press

to access the PictBridge menu.

5

Press the arrow buttons to select the paper size, paper type, photo size, and layout of the photos that you want
to print. Press

each time you make a selection.

6

See the documentation for your camera to begin printing.

Note: If you insert the camera while the printer is performing another job, then wait for the job to finish before
printing from the camera.

Printing

38

Advertising