Middle frame, Removing the middle frame, Replacing the middle frame – Dell Inspiron One 2205 (Mid 2010) User Manual
Page 39
Back to Contents Page
Middle Frame
Dell™ Inspiron™ One 2205 Service Manual
Removing the Middle Frame
1.
Follow the instructions in
Before You Begin
.
2.
Remove the back cover (see
Removing the Back Cover
).
3.
Follow the instructions from
step 3
to
step 5
in
Removing the Optical Drive
.
4.
Follow the instructions from
step 3
to
step 7
in
Removing the Front Stand
.
5.
Remove the rear stand cover (see
Removing the Rear Stand Cover
).
6.
Remove the system-board shield (see
Removing the System-Board Shield
).
7.
Disconnect the speaker cable from the connector (CN10) on the system board.
8.
Make a note of the speaker cable routing and remove the cable from the routing guides.
9.
Remove the cables from the routing guides on the middle frame.
10.
Remove the 13 screws that secure the middle frame to the chassis.
11.
Lift the middle frame at an angle toward the side of the computer and out of the chassis.
12.
Remove the speaker (see
Removing the Speakers
).
Replacing the Middle Frame
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
is not covered by your warranty.
CAUTION:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).
1
middle frame
2
routing guide
3
screws (13)