Dell Inspiron One 2205 (Mid 2010) - Manual (Page 5)

5. Replace the two screws that secure the B-CAS card to the chassis.
6. Replace the system-board shield (see Removing the System-Board Shield ).
7. Replace the rear stand cover (see Replacing the Rear Stand Cover ).
8. Follow the instructions from step 4 to step 7 in Replacing the Front Stand .
9. Replace the back cover (see Replacing the Back Cover ).
10. Connect your computer and all attached devices to electrical outlets, and turn them on.
Back to Contents Page
CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.