Processor, Removing the processor – Dell Inspiron One 2205 (Mid 2010) User Manual
Page 47
Back to Contents Page
Processor
Dell™ Inspiron™ One 2205 Service Manual
Removing the Processor
1.
Follow the instructions in
Before You Begin
.
2.
Remove the back cover (see
Removing the Back Cover
).
3.
Follow the instructions from
step 3
to
step 7
in
Removing the Front Stand
.
4.
Remove the rear stand cover (see
Removing the Rear Stand Cover
).
5.
Remove the system-board shield (see
Removing the System-Board Shield
).
6.
Remove the MXM-assembly fan (see
Removing the MXM-Assembly Fan
).
7.
Remove the MXM assembly (see
Removing the MXM Assembly
).
8.
Remove the processor heat-sink fan (see
Removing the Processor Heat-Sink Fan
).
9.
Remove the processor heat-sink (see
Removing the Processor Heat-Sink
).
10.
Press and push the release lever down and out to release it from the tab that secures it.
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
is not covered by your warranty.
CAUTION:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).
1
processor
2
release lever
3
processor socket
CAUTION:
When removing or replacing the processor, do not touch any of the pins inside the processor socket or allow any objects to fall on the
pins in the processor socket.