Dell OptiPlex GX200 - Manual (Page 13)

Table 1. System-Board Jumper Settings
System Board Labels
Table 2 lists the labels for connectors and sockets on your system board, and it gives a brief description of their functions.
Table 2. System Board Connectors and Sockets
Expansion Cards
Each GX200 low-profile chassis can accommodate 32-bit PCI expansion cards and 16-bit and 8-bit ISA expansion cards, depending on the
installed riser board. See Figure 19 for examples of the expansion cards.
Figure 19. Expansion Cards
Jumper Setting Description
PSWD
(default)
Password features are enabled.
(default)
Password features are disabled.
SAFE
(default)
Reserved (do not change).
BIOS
(default)
Reserved (do not change).
RTCRST
(default)
Real-time clock reset. Can be used for troubleshooting purposes.
jumpered unjumpered
Connector or Socket Description
AMC ATI multimedia channel connector
BATTERY Battery socket
CD_IN CD-ROM audio interface connector
RIMM_x RIMM socket
DSKT Diskette/tape drive interface connector
ENET Integrated NIC connector
EXT_SPKR External speaker connector
FAN Microprocessor fan connector
HDLED Hard-disk drive LED connector
IDEn EIDE interface connector
INTRUDER Chassis intrusion switch connector
KYBD Keyboard connector
MODEM Modem audio connector
MONITOR Video connector
MOUSE Mouse connector
PANEL Control panel connector
PARALLEL Parallel port connector; sometimes referred to as LPT1
PCIn* PCI expansion-card connector
POWER_1 Main power input connector
POWER_2 3.3-V power input connector
RISER Riser board connector
SERIALn Serial port connector
SLOT1_PRI Primary microprocessor connector
USB USB connectors