Dell PowerEdge 750 - Manual (Page 3)

Table A-1. System Board Jumper Settings
System Board Connectors
See Figure A -3 and Table A -2 for the location and description of the system board connectors.
Figure A-3. System Board Connectors
Table A-2. System Board Connectors
Jumper Setting Description
PASSWD
(default)
The password feature is enabled.
The password feature is disabled.
NVRAM_CLR
(default)
The configuration settings in NVRAM are retained at system boot.
The configuration settings in NVRAM are cleared at next system boot.
jumpered unjumpered
Connector Description