System battery, Cooling shroud, Removing the cooling shroud – Dell PowerEdge 750 User Manual
Page 49: Installing the cooling shroud, Replacing the system battery
Cooling Shroud
The cooling shroud covers the processor and system battery. The shroud also directs air flow to the expansion cards and system memory.
Removing the Cooling Shroud
1.
Open the system. See "
Opening the System
" in Troubleshooting Your System."
2.
While grasping the cooling shroud, press the release latch and rotate away from the fan assembly. See
.
3.
Remove the cooling shroud.
Figure 6-2. Installing and Removing the Cooling Shroud
Installing the Cooling Shroud
1.
Insert the two tabs of the cooling shroud into the back panel. See
.
2.
Rotate the cooling shroud down until the release latch snaps into place securing the shroud to the fan assembly.
3.
Close the system. See "
Closing the System
" in "Troubleshooting Your System."
System Battery
Replacing the System Battery
1.
Enter the System Setup program and, if possible, make a printed copy of the System Setup screens.
See "Using the System Setup Program" in the User's Guide.
2.
Open the system. See "
Opening the System
" in Troubleshooting Your System."
3.
Remove the cooling shroud. See "
4.
Locate the battery on the system board. See
Figure A
-3
for the battery location.
CAUTION:
See your System Information Guide for complete information about safety precautions, working inside the computer, and protecting
against electrostatic discharge.
CAUTION:
See your System Information Guide for complete information about safety precautions, working inside the computer, and protecting
against electrostatic discharge.