Replacing the hard drive(s), Procedure, 6 if you are replacing the secondary hard-drive – Dell Inspiron 660 (Early 2012) User Manual
Page 48: Postrequisites
48
Hard Drive(s)
Replacing the Hard Drive(s)
Procedure
1 Check the documentation that shipped with the hard drive to verify that it
is configured for your computer.
2 Place the hard-drive brackets in position and replace the screws (one on
each side) that secure the hard-drive brackets to the hard drive.
3 Slide the hard-drive assembly into the hard-drive bay.
4 Replace the screws that secure the hard-drive assembly to the
hard-drive bay.
5 If you are replacing the primary hard-drive, connect the power and data
cables to the primary hard drive.
6 If you are replacing the secondary hard-drive:
a
Connect the power cable to the primary and secondary hard-drives.
b
Connect the data cable to the secondary hard-drive.
Postrequisites
1 Replace the computer cover. See "Replacing the Computer Cover" on
2 Follow the instructions in "After Working Inside Your Computer" on
book.book Page 48 Tuesday, April 17, 2012 11:37 AM