Dell Inspiron 660 (Early 2012) - Manual (Page 86)

86
System Board
Procedure
1 Disconnect all cables connected to the system board. See "System Board
Components" on page 14. Note the routing of all cables as you remove
them so that you can re-route them correctly after installing the new
system board.
2 Remove the screws that secure the system board to the chassis.
3 Lift the system board up and out of the chassis.
1 screws (6) 2 system board
1 2
book.book Page 86 Tuesday, April 17, 2012 11:37 AM