Replacing the power button module, Procedure, Postrequisites – Dell Inspiron 660 (Early 2012) User Manual
Page 63
Advertising
Power Button Module
63
Replacing the Power Button Module
Procedure
1 Align and push the power button module tabs into the slots on the front
panel.
2 Connect the power button module cable to the system board connector
(LEDH2). See "System Board Components" on page 14.
Postrequisites
1 Replace the front bezel. See "Replacing the Front Bezel" on page 27.
2 Replace the computer cover. See "Replacing the Computer Cover" on
3 Follow the instructions in "After Working Inside Your Computer" on
book.book Page 63 Tuesday, April 17, 2012 11:37 AM
Advertising