Display bezel, Replacing the display assembly, Removing the display bezel – Dell Inspiron 1750 (Mid 2009) User Manual
Page 24
Replacing the Display Assembly
1.
Follow the procedures in
Before You Begin
.
2.
Place the display assembly in position and replace the two screws that secure the display assembly to the computer base.
3.
Replace the palm rest (see
Replacing the Palm Rest
).
4.
Replace the keyboard (see
Replacing the Keyboard
).
5.
Replace the center control cover (see
Replacing the Center Control Cover
).
6.
Replace the two screws at the bottom of the computer.
7.
Replace the optical drive (see
Replacing the Optical Drive
).
8.
Replace the hard drive (see
Replacing the Hard Drive
).
9.
Replace the memory module(s) (see
Replacing the Memory Module(s)
).
10.
Replace the module cover (see
Replacing the Module Cover
).
11.
Replace the battery (see
Replacing the Battery
).
Display Bezel
Removing the Display Bezel
1.
Follow the procedures in
Before You Begin
.
2.
Remove the display assembly (see
).
3.
Using your fingertips, carefully pry up the inside edge of the display bezel.
1
display assembly
2
screws (2)
CAUTION:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.
CAUTION:
The display bezel is extremely fragile. Be careful when removing it to prevent damaging the bezel.