Replacing the expresscard reader board – Dell Inspiron 1750 (Mid 2009) User Manual
Page 29
Replacing the ExpressCard Reader Board
1.
Follow the procedures in
Before You Begin
.
2.
Align the ExpressCard reader board with the system board connector and press the board into place.
3.
Replace the two screws that secure the ExpressCard reader board to the computer base.
4.
Replace the palm rest (see
Replacing the Palm Rest
).
5.
Replace the keyboard (see
Replacing the Keyboard
).
6.
Replace the center control cover (see
Replacing the Center Control Cover
).
7.
Replace the memory module(s) (see
Replacing the Memory Module(s)
).
8.
Replace the module cover (see
Replacing the Module Cover
).
9.
Replace the optical drive (see
Replacing the Optical Drive
).
10.
Replace the hard drive (see
Replacing the Hard Drive
).
11.
Replace the battery (see
Replacing the Battery
).
Back to Contents Page
CAUTION:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.