Replacing the power button board – Dell Inspiron 1750 (Mid 2009) User Manual
Page 47
12.
Lift the power button board off the palm rest.
Replacing the Power Button Board
1.
Follow the procedures in
Before You Begin
.
2.
Align the holes on the power button board with the protrusion on the palm rest and stick it in place.
3.
Slide the power button board cable into the system board connector and pull down the connector latch to secure the cable to the connector.
4.
Route the display cable, camera cable, and Bluetooth board cable into their routing guides and connect the cables to the respective system board
connectors.
5.
Replace the keyboard (see
Replacing the Keyboard
).
6.
Replace the center control cover (see
Replacing the Center Control Cover
).
7.
Replace the optical drive (see
Replacing the Optical Drive
).
8.
Replace the hard drive (see
Replacing the Hard Drive
).
9.
Replace the memory module(s) (see
Replacing the Memory Module(s)
).
10.
Replace the module cover (see
Replacing the Module Cover
).
11.
Replace the battery (see
Replacing the Battery
).
Back to Contents Page
CAUTION:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.