Osd warning messagess – Dell SP2009WFP Monitor User Manual
Page 20
OSD Warning Messagess
See
Solving Problems
for more information.
NOTE:
Press any button on the monitor to terminate LCD Conditioning at any time.
Factory Reset
Resets all OSD settings to the factory preset values.
Personalize
Allow you to adjust shortcut key button for preset mode. Brightness & Contrast Auto Adjust and Input source.
The following warning messages may appear on the screen to indicate that the monitor is out of synchronization.
This means that the monitor cannot synchronize with the signal that it is receiving from the computer. Either the signal is too high or too low
for the monitor to use. See
Specifications
for the Horizontal and Vertical frequency ranges addressable by this monitor. Recommended mode
is 1680 X 1050 at 60Hz.
If you press any button other than the power button one of the following messages will appear depending on the selected input:
When monitor enters Power Save mode, the following message appears :