Dell POWEREDGE M1000E - Manual (Page 158)

140 Dell Converged Enhanced Ethernet Administrator’s Guide
53-1002116-01
CEE configuration management tasks
17
Display the running configuration file
To display the running configuration, perform the following steps from Privileged EXEC mode.
1. Enter the configure terminal command to access global configuration mode.
2. Enter the show command to display the configuration.
switch#show running-config
Saving the running configuration file
This tasks causes the running configuration to become the default configuration.
To save the running configuration, perform the following steps from Privileged EXEC mode.
1. Enter the configure terminal command to access global configuration mode.
2. Enter the copy command to copy the currently running configuration to the startup
configuration.
switch#copy running-config startup-config
Overwrite the startup config file (y/n): y
Loading the startup configuration file
If you wish to reverse the changes to the running configuration, this task reloads the default startup
configuration, overwriting the running configuration.
To load the default configuration, perform the following steps from Privileged EXEC mode.
1. Enter the configure terminal command to access global configuration mode.
2. Enter the copy command to load the startup configuration.
switch#copy startup-config running-config
Erasing the startup configuration file.
NOTE
This task does not affect the running configuration file.
To erase the startup configuration, perform the following steps from Privileged EXEC mode.
1. Enter the configure terminal command to access global configuration mode.
2. Enter the write command to erase the startup configuration file.
switch#write erase