Dell POWEREDGE M1000E - Manual (Page 159)

Dell Converged Enhanced Ethernet Administrator’s Guide 141
53-1002116-01
CEE configuration management tasks
17
Archiving the running configuration file
This tasks allows you to archive the running configuration to an archive folder on an FTP site, so
that it can be stored without changing the startup configuration.
To archive the running configuration file, perform the following steps from Privileged EXEC mode.
1. Enter the configure terminal command to access global configuration mode.
2. Enter the copy command to archive the running configuration file.
switch#copy running-config ftp://jsmith:password@/archive/config_file]
Restore an archived running configuration file
To restore the running configuration, perform the following steps from Privileged EXEC mode.
1. Enter the configure terminal command to access global configuration mode.
2. Enter the copy command to restore the running configuration file.
switch#copy running-config ftp://jsmith:password@/archive/config_file]
Archiving the startup configuration file
This tasks allows you to archive the startup configuration to an archive folder on an FTP site.
To archive the startup configuration, perform the following steps from Privileged EXEC mode.
1. Enter the configure terminal command to access global configuration mode.
2. Enter the copy command to archive the startup configuration file.
switch#copy startup-config ftp://jsmith:password@/archive/config_file]
Restore an archived startup configuration file
To restore the startup configuration, perform the following steps from Privileged EXEC mode.
1. Enter the configure terminal command to access global configuration mode.
2. Enter the copy command to restore the startup configuration file.
switch#copy startup-config ftp://jsmith:password@/archive/config_file]
Archive a startup configuration from Flash
This task also works for running configuration files.
To archive the startup configuration, perform the following steps from Privileged EXEC mode.
1. Enter the configure terminal command to access global configuration mode.
2. Enter the copy command to restore the archived configuration file.
switch#copy startup-config flash://config_filename