Dell Studio 1435 (Late 2008) - Manual (Page 18)

11. Slide the battery into the bay until it clicks into place.
Display Bezel
Removing the Display Bezel
1. Follow the instructions in Removing the Display Assembly .
2. Using your fingertips, carefully pry up the inside edge of the display bezel.
3. Remove the display bezel.
Replacing the Display Bezel
1. Align the display bezel over the display panel, and gently snap the bezel into place.
2. Follow the instructions in Replacing the Display Assembly .
Display Panel
Removing the Display Panel
1. Follow the instructions in Removing the Display Assembly .
2. Remove the display bezel (see Removing the Display Bezel ).
3. Remove the four screws securing the display panel.
4. Remove the two screws securing the inverter board.
NOTICE: The display bezel is extremely fragile. Be careful when removing it to prevent damaging the bezel.
1 display bezel