Audio board, Removing the audio board, Replacing the audio board – Dell Studio 1435 (Late 2008) User Manual
Page 2
Back to Contents Page
Audio Board
Dell Studio™ 1435 Service Manual
Removing the Audio Board
1.
Follow the instructions in
Before You Begin
.
2.
Follow the instructions in
Removing the Palm Rest
.
3.
Remove the two screws that secure the audio board.
4.
Lift the audio board out of the computer base.
Replacing the Audio Board
1.
Place the audio board in the computer base and replace the two screws that secure it.
2.
Follow the instructions in
Replacing the Palm Rest
.
Back to Contents Page
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions that shipped with your computer.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
1
screw (2)
2
audio board
NOTICE:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may result in
damage to the computer.