Dell 5350dn Mono Laser Printer - Manual (Page 104)

NetWare menu
This menu is available from the Network/Ports menu:
Network/Ports  Standard Network or Network <x>  Std Network Setup or Net <x> Setup  NetWare
Menu item Description
Activate
Yes
No
Activates NetWare support
Note: No is the factory default setting.
View Login Name
Lets you view the assigned NetWare login name
Note: This can be changed only from the Embedded Web Server.
Print Mode
Lets you view the assigned NetWare print mode
Note: This can be changed only from the Embedded Web Server.
Network Number
Lets you view the assigned NetWare network number
Note: This can be changed only from the Embedded Web Server.
Select IPX Frame Types
Ethernet 802.2
Ethernet 802.3
Ethernet Type II
Ethernet SNAP
Enables the Ethernet frame type setting
Note: On is the factory default setting for all menu items.
Packet Burst
Yes
No
Reduces network traffic by allowing the transfer and acknowledgement of
multiple data packets to and from the NetWare server
Note: Yes is the factory default setting.
NSQ/GSQ Mode
Yes
No
Specifies the NSQ/GSQ Mode setting
Note: Yes is the factory default setting.
USB menu
Menu item Description
PCL SmartSwitch
On
Off
Sets the printer to automatically switch to PCL emulation when a print job received
through a USB port requires it, regardless of the default printer language
Notes:
• On is the factory default setting.
• When the Off setting is used, the printer does not examine incoming data.
• When the Off setting is used, the printer uses PostScript emulation if the PS
SmartSwitch setting is On. It uses the default printer language specified in the
Setup menu if the PS SmartSwitch setting is Off.
Understanding printer menus
104