Installing a flash memory or firmware card – Dell 5350dn Mono Laser Printer User Manual
Page 22
Advertising
2
Unpack the memory card.
Note: Avoid touching the connection points along the edge of the card.
3
Open the memory card connector latches.
4
Align the notches on the memory card with the ridges on the connector.
2
1
1
Notches
2
Ridges
5
Push the memory card straight into the connector until it snaps into place.
6
Replace the system board cover and close the system board door.
1
2
3
Installing a flash memory or firmware card
Note: This task requires a flathead screwdriver.
Additional printer setup
22
Advertising