Dell Inspiron Zino HD (400, Late 2009) - Manual (Page 17)

Replacing the Hard Drive
1. Follow the procedures in Before You Begin .
2. Remove the new hard drive from its packaging.
Save the original packaging for storing or shipping the hard drive.
3. Align the screw holes on the drive bay with the screw holes on the hard drive.
4. Replace the four screws that secure the hard drive to the drive bay.
5. Replace the drive bay (see Replacing the Drive Bay ).
6. Replace the optical drive (see Replacing the Optical Drive ).
7. Replace the top bracket (see Replacing the Top Bracket ).
8. Replace the top cover (see Replacing the Top Cover ).
9. Connect your computer and all attached devices to electrical outlets, and turn them on.
10. Install the operating system for your computer, as needed. See "Restoring Your Operating System" in the Setup Guide.
11. Install the drivers and utilities for your computer, as needed. For more information, see the Dell Technology Guide.
Back to Contents Page
CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.