Dell Inspiron Zino HD (400, Late 2009) User Manual
Page 37
Advertising
3.
Replace the four screws that secure the chassis fan to the I/O bracket.
4.
Connect the chassis fan cable to the connector on the system board.
5.
Replace the I/O bezel (see
Replacing the I/O Bezel
).
6.
Replace the top bracket (see
Replacing the Top Bracket
).
7.
Replace the top cover (see
Replacing the Top Cover
).
8.
Connect your computer and all attached devices to electrical outlets, and turn them on.
Back to Contents Page
CAUTION:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.
Advertising