Dell Inspiron Zino HD (400, Late 2009) User Manual
Page 19
3.
Align the tabs on the drive bay with the slots on the chassis. Slide the drive bay to align the screw holes on the drive bay with the screws holes on the
system board.
4.
Replace the two screws that secure the drive bay to the system board.
5.
Replace the screw that secures the power-button bracket to the drive bay (see
Replacing the Power-Button Bracket
).
6.
Replace the optical drive (see
Replacing the Optical Drive
).
7.
Replace the top bracket (see
Replacing the Top Bracket
).
8.
Replace the top cover (see
Replacing the Top Cover
).
9.
Connect your computer and all attached devices to electrical outlets, and turn them on.
Back to Contents Page
CAUTION:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.