Dell Dimension 8400 - Manual (Page 27)

Setting Up and Using Your Computer
27
NOTE:
In the following step, you will lose all data contained on the member drive.
11 Click Finish to start migrating, or click Back to make changes. You can use your computer
normally during the migration process.
Migrating to a RAID 1 Volume
1 Set your computer to RAID-enabled mode (see page 22).
2 Click the Start button and point to All Programs → Intel(R) Application Accelerator → Intel
Application Accelerator to launch the Intel(R) Storage Utility.
NOTE:
If you do not see an Actions menu option, you have not yet set your computer to RAID-enabled
mode (see page 22).
3 On the Actions menu, click Create RAID Volume From Existing Hard Drive to launch the
Migration Wizard.
4 Click Next on the first Migration Wizard screen.
5 Enter a RAID volume name or accept the default.
6 From the drop-down box, select RAID 1 as the RAID level.
NOTE:
Select the hard drive that already has the data or operating system files that you want to maintain
on the RAID volume as your source hard drive.
7 On the Select Source Hard Drive screen, double-click the hard drive from which you want to
migrate, and click Next.
8 On the Select Member Hard Drive screen, double-click the hard drive to select the member
drive that you want to act as the mirror in the array, and click Next.
9 On the Specify Volume Size screen, select the volume size you want, and click Next.
NOTE:
In the following step, you will lose all data contained on the member drive.
10 Click Finish to start migrating, or click Back to make changes. You can use your computer
normally during migration process.
Creating a Spare Hard Drive
A spare hard drive may be created with a RAID 1 array. The spare hard drive will not be recognized by
the operating system, but you will be able to see the spare drive from within Disk Manager or the Intel
Option ROM Utility. When a member of the RAID 1 array is broken, the computer automatically
rebuilds the mirror array using the spare hard drive as the broken member’s replacement.
To Mark a Drive as a Spare Hard Drive:
1 Click the Start button and point to Programs
→
Intel(R) Application Accelerator
→
Intel
Application Accelerator to launch the Intel(R) Storage Utility.
2 Right-click the hard drive you want to mark as a spare hard drive.
3 Click Mark as Spare.