Cd/dvd drive – Dell Dimension 8400 User Manual
Page 99
Removing and Installing Parts
99
5
If you are installing a new floppy drive rather than replacing a drive, remove the front-panel
inserts (see page 94).
6
Check all cable connections, and fold cables out of the way to provide airflow for the fan and
cooling vents.
7
Close the computer cover. (see page 104).
NOTICE:
To connect a network cable, first plug the cable in to the network device and then plug it in to
the computer.
8
Connect your computer and devices to their electrical outlets, and turn them on.
See the documentation that came with the drive for instructions on installing any software
required for drive operation.
9
Enter system setup (see page 111) and select the appropriate Diskette Drive option.
10
Verify that your computer works correctly by running the Dell Diagnostics (see page 52).
CD/DVD Drive
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions
located in the Product Information Guide.
CAUTION:
To guard against electrical shock, always unplug your computer from the electrical outlet
before opening the cover.