Paper jam lights remain on after jam is cleared, Solving print quality problems, Isolating print quality problems – Dell 2230d/dn Mono Laser Printer User Manual
Page 114
F
LEX
,
FAN
,
AND
STRAIGHTEN
THE
PAPER
BEFORE
LOADING
IT
IN
THE
TRAY
E
NSURE
THAT
THERE
IS
NOT
TOO
MUCH
PAPER
IN
THE
TRAY
The stack of paper you load must not exceed the maximum stack height indicated in the tray.
C
HECK
THE
GUIDES
Move the guides in the tray to the correct positions for the paper size loaded.
T
HE
PAPER
MAY
HAVE
ABSORBED
MOISTURE
DUE
TO
HIGH
HUMIDITY
•
Load paper from a fresh package.
•
Store paper in its original wrapper until you use it.
Paper jam lights remain on after jam is cleared
The paper path is not clear. Clear jammed paper from the entire paper path, and then close any open doors.
Page that jammed does not reprint after the jam is cleared
Jam Recovery is set to Off.
If the printer is connected to a computer by a USB or parallel cable, open the Local Printer Settings Utility for Windows
or Printer Settings for Macintosh. From the Setup menu, ensure that Jam Recovery is set to Auto or On.
Solving print quality problems
The information in the following topics may help you solve print quality problems. If these suggestions still do not
correct the problem, call Customer Support. You may have a printer part that requires adjustment or replacement.
Isolating print quality problems
Print the print quality test pages to isolate print quality problems.
1
Turn the printer off, and then open the front door.
2
Press and hold
while turning the printer on.
3
Release
.
Troubleshooting
114